


Finish Line Factory Nylon Braided Hose 3 Foot Roll
Compatible with E85 and other fuels
Constructed with a strong stainless steel double braid that resists corrosion and abrasion
Uses a nylon-reinforced CPE (chlorinated polyethylene) synthetic rubber line
Compatible in temperatures ranging from -40C to 150C
deal for delivery of oil, fuel, water, or any other fluid your racecar needs to win!
These hoses are ONLY compatible with Swivel Hose Ends. They will not work with Push Lock Hose Ends or PTFE Hose Ends.
Finish Line Factory’s Nylon Braided Hose uses high-quality nylon braids and rubber lining that resists oxidation and is more than strong enough to withstand the toughest racing duties. Our hose is compatible with most fuels, coolants, and oils, and has a high operating temperature and maximum pressure rating so that it can get your fluids where they need to be in nearly any condition!
Compatible with all hydrocarbon and alcohol based fuels
Compatible with all lubricants
Constructed with a strong nylon braid that resists corrosion and abrasion
Uses a nylon-reinforced CPE (chlorinated polyethylene) synthetic rubber line
Compatible in temperatures ranging from -40C to 150C (-40F to 300F)
Ideal for delivery of oil, fuel, water, or any other fluid your racecar needs to win!
Available in a wide range of sizes to suit almost any need
These hoses are ONLY compatible with Swivel Hose Ends. They will not work with Push Lock Hose Ends or PTFE Hose Ends.
Part Number Hose ID OD (mm) Max Op. PSI Min/Max Op. Temp
NYL-4AN 5.4mm 11.2mm 500 -40 C
7/32” 7/16” 150 C
NYL-6AN 8.7mm 14.2mm 500 -40 C
11/32” 9/16” 150 C
NYL-8AN 11.1mm 17.1mm 500 -40 C
7/16” 11/16” 150 C
NYL-10AN 14.2mm 20.8mm 500 -40 C
9/16” 53/64” 150 C
NYL-12AN 17.4mm 24.4mm 350 -40 C
11/16” 31/32” 150 C
NYL-16AN 22.2mm 30.5mm 350 -40 C
7/8” 1 13/64” 150 C
NYL-20AN 28.5mm 35.81mm 350 -40 C
1 1/8” 1 13/32” 150 C
Compatible with E85 and other fuels
Constructed with a strong stainless steel double braid that resists corrosion and abrasion
Uses a nylon-reinforced CPE (chlorinated polyethylene) synthetic rubber line
Compatible in temperatures ranging from -40C to 150C
deal for delivery of oil, fuel, water, or any other fluid your racecar needs to win!
These hoses are ONLY compatible with Swivel Hose Ends. They will not work with Push Lock Hose Ends or PTFE Hose Ends.
Finish Line Factory’s Nylon Braided Hose uses high-quality nylon braids and rubber lining that resists oxidation and is more than strong enough to withstand the toughest racing duties. Our hose is compatible with most fuels, coolants, and oils, and has a high operating temperature and maximum pressure rating so that it can get your fluids where they need to be in nearly any condition!
Compatible with all hydrocarbon and alcohol based fuels
Compatible with all lubricants
Constructed with a strong nylon braid that resists corrosion and abrasion
Uses a nylon-reinforced CPE (chlorinated polyethylene) synthetic rubber line
Compatible in temperatures ranging from -40C to 150C (-40F to 300F)
Ideal for delivery of oil, fuel, water, or any other fluid your racecar needs to win!
Available in a wide range of sizes to suit almost any need
These hoses are ONLY compatible with Swivel Hose Ends. They will not work with Push Lock Hose Ends or PTFE Hose Ends.
Part Number Hose ID OD (mm) Max Op. PSI Min/Max Op. Temp
NYL-4AN 5.4mm 11.2mm 500 -40 C
7/32” 7/16” 150 C
NYL-6AN 8.7mm 14.2mm 500 -40 C
11/32” 9/16” 150 C
NYL-8AN 11.1mm 17.1mm 500 -40 C
7/16” 11/16” 150 C
NYL-10AN 14.2mm 20.8mm 500 -40 C
9/16” 53/64” 150 C
NYL-12AN 17.4mm 24.4mm 350 -40 C
11/16” 31/32” 150 C
NYL-16AN 22.2mm 30.5mm 350 -40 C
7/8” 1 13/64” 150 C
NYL-20AN 28.5mm 35.81mm 350 -40 C
1 1/8” 1 13/32” 150 C